Aquatiz F91 Lightweight Smart Toilet
This toilet features a sleek and modern appearance, with a compact and slim design.
It employs zero-pressure technology and dual cleaning technology:
Zero-pressure flushing: Utilizing a tank and pump flushing method to achieve true zero-pressure flushing.
Aquatiz F15 Smart Toilet with Foot Sensor Open Lid
Equipped with warm air drying, optional foam shield, and various other functions. It also features intelligent flushing, dual antibacterial protection, and foot sensor flushing, making the most ordinary toilet moments more comfortable and enjoyable!
Aquatiz F11 Entry-level Smart Toilet White/Grey
Dimensions |
693*423*503 mm |
Rough-in |
305/400 mm |
Drainage |
Bottom drainage |
Control |
Remote control / Side knob control |
Lid Opening |
Soft-close / Automatic flip |
Heating Method |
Instantaneous heating |
Environmental Temperature |
0-40°C |
Water Pressure Requirement |
0.14MPa-0.8MPa |
Water Flow Rate Requirement |
≥15L/Min |
Toilet Flushing Water Volume |
4.8L (full flush 6.0L/half flush 4.2L) |
Seat Temperature |
Seat temperature adjustment (6 levels) (including off) |
Water Temperature |
Water temperature adjustment (6 levels) (including off) |
Warm Air Temperature |
Warm air temperature adjustment (6 levels) (including off) |
Warm Air Flow Rate |
Greater than 0.2m³/min |
Safety Devices |
Temperature sensor, anti-dry-burning device, temperature controller, temperature fuse, ground protection, leakage protection device, anti-freeze device, high water pressure protection, anti-low temperature burn protection |
Aquatiz Flowing Curve Smart Toilet B55
Rated Voltage |
220V |
Rated Frequency |
50Hz |
Rated Power |
1005W |
Maximum Power (Water Heater Power) |
1500W |
Heating Method |
Instantaneous heating |
Environmental Temperature |
3-35°C |
Toilet Flushing Water Pressure Requirement |
No water pressure requirement |
Cover Water Pressure Requirement |
Minimum necessary water pressure 0.08MPa, maximum water pressure 0.8MPa |
Cleaning Flow Rate Requirement |
Approximately 400∽670ml/min (water pressure 0.2Mpa) |
Toilet Flushing Water Volume |
4.8L (full flush 6.0L/half flush 4.2L) |
Seat Temperature |
Seat temperature adjustment (6 levels) (including off) |
Water Temperature |
Water temperature adjustment (6 levels) (including off) |
Warm Air Temperature |
Warm air temperature adjustment (6 levels) (including off) |
Warm Air Flow Rate |
Greater than 0.2m³/min |
Safety Devices |
Temperature sensor, anti-dry-burning device, temperature controller, temperature fuse, ground protection, leakage protection device, anti-freeze device, high water pressure protection, anti-low temperature scald protection |
Execution Standard |
GB 4706.1-2005, GB 4706.53-2008, GB 6952-2015 |
Power Cord Length |
Approximately 1.5m |